Lielformāta printeri

Canon Arizona 135 GT

Tehniskie dati

Tehniskie dati

  • Print Speed

    Up to 34.2 m2 per hour

  • Roll Media Option

    Field-upgradeable option to create flexible media applications of up to 220 cm wide, or 50 kilograms, including thin and heat-sensitive media.

  • Table size

    125 x 250 cm

  • Annual print volume

    Smart investment from 2,000 m2 per year onwards

  • Print technology

    5 channel piezoelectric inkjet system using VariaDot imaging technology

  • Resolution

    Variable droplet sizes from 6 to 30 picoliters for photo-realistic prints with sharpness only before seen at resolutions of 1,440 dpi or higher.

Detalizēti tehniskie dati

  • Drukāšanas tehnoloģija
    5 channel piezoelectric inkjet system using VariaDot imaging technology; with one 636-nozzle, variable droplet printhead per channel.
  • Tintes konfigurācijas
    CMYKW
  • Izšķirtspēja
    Variable droplet sizes from 6 to 30 picoliters. The ability to vary the drop size to 6 picoliters produces sharp images with smoother gradients and quartertones. The ability to jet larger droplets up to 30 picoliters produces uniform colors. The result is exceptional photo-realistic print quality with sharpness only before seen at resolutions of 1,440 dpi or higher.
  • Drukāšanas ātrums
    Print Modes Flatbed m2/h RMO m2/h
    Express 34.2 25.8
    Production 20.8 17
    Quality 14.6 12
    Quality-Matte 10.4 7.9
    Quality-Density 7.9 6.3
    Quality-Layered (2) 7.3 6
    Quality-Layered (3) 4.8 4
    Fine Art 11.7 9.5
  • Tintes sistēma
    IJC357 UV-curable inks packed in quick-change, 800 milliliter bags for: Black, Cyan, Magenta, Yellow. White ink packed in 1 liter bags.
  • Sistēmas arhitektūra
    True flatbed for rigid media printing with available Roll Media Option for flexible media printing.
  • Ģeometriska precizitāte
    Measured Over Flatbed RMO Maximum Error Flatbed RMO
    Line length
    (system width)
    2,500 mm 2,190 mm ± 0.8 mm ± 0.6 mm
    Line length
    (system height)
    1,250 mm 2,000 mm ± 0.4 mm ± 1.5 mm
    Line straightness (system width) 2,500 mm 2,190 mm 0.7 mm 0.7 mm
    Line straightness (system height) 1,250 mm 2,000 mm 0.5 mm 2.0 mm
    Diagonal Error (“squareness”) 1,250x2,500 mm 2,000x2,190 mm 1.0 mm 2.5 mm
  • Cieti materiāli
    Maximum area: 125 x 250 cm
    Maximum thickness: 50.8 mm
    Maximum mass: 34 kg/m2
  • Cietu materiālu drukāšanas laukums
    Up to: 126 x 251 cm (for edge-to-edge printing)
  • Materiālu ruļļu tehniskie dati
    90 to 220 cm. Up to 50 kg (at any width). Maximum diameter: 240 mm.
    Core: 3 inches (inside).Bias: Print-side-in or print-side-out. Most types (application dependent)
  • Materiālu ruļļu drukāšanas platums
    Up to 219 cm
  • Attēlu apstrāde
    ONYX® Thrive™ 21
  • Savienojamība
    10/100/1000 Base-T
  • Paaugstināta drukāšana
    by Arizona Xpert
  • Darbu automatizācija
    by Arizona Xpert
  • Elektroenerģija / Saspiests gaiss
    2 x 200-240 VAC, 50/60 Hz, Single-phase, 16A per circuit
    Circuit Breakers: North America: 20A. Europe: 16A. ROW: See CB Scheme Report
    Clean, dry, compressed air using a Coalescing Filter. Pressure Regulator set to 690 kPa (100 psi) and connects air regulator to ½ inch or 12mm OD air tubing. Peak flow: 57 l/min at 690 kPa (2 cfm at 100 psi)
  • Vide
    Temperature: 18˚ to 30˚ C
    Relative humidity: 30 to 70% (non-condensing)
    Ventilation: 1,200 m3 per hour / 700 cfm minimum (see Site Preparation Guide)
    Altitude: 2,750 m maximum, however some components specify a limit of
    2,000 m
  • Izmērs
    Printer only: 4.66 m x 2.0 m
    Printer + Roll Media Option: 4.66 m x 2.29 m
    Table height: 0.88 m / Overall height: 1.3 m
  • Svars
    Printer only: 849 kg
    Printer + Roll Media Option: 1,099 kg